I can’t tell you how many times I’ve had a contractor scratch his head and look at me with glazed eyes as I try to describe what I need from his electrician to provide a drawer for my clients to charge their devices out of sight.
The Docking Drawer™ from JTech Solutions removes the hassle with a convenient and safe way to integrate a grounded outlet into a cabinet drawer.
The outlet comes with two grounded 3-pronged outlets and two USB outlets with integrated on/off safety switch. The Docking Drawer™ is UL 962 approval pending and max rated for 3A/375w. The circuit is protected by 5A pop out breaker accessible from inside the cabinet.
The Docking drawer is best installed during new construction but can be retrofitted if you can run an electrical line to the rear of the cabinet. The drawer may need to be modified since the device has a limited reach. The device alone costs $139.00.
I think I might need to test one and see how it works with my standard cabinet specs.
I try to specify a USB receptacle in almost every kitchen project I work on.
Designed to replace conventional duplex receptacles, it allows you to plug your mobile phones, tablets and other electronic devices into the wall without the need for a bulky AC adapter.
The 15-amp receptacle has been around for a little while. But, many people do not know that a 20-amp receptacle is also available. This is good news for owners of devices – like iPads, that need more juice.
The 20 Amp USB Charger/Tamper-Resistant Receptacle offers 2.1 amps of charging power inside a 20-amp, 125-volt tamper-resistant receptacle.
The two USB ports on the Leviton receptacle are designed for use with different devices, depending on their power draw.
The USB port on the left will output up to 0.7A, while the USB port on the right is capable of up to 2.1A. The right port also incorporates an auto-sensing chip, which will properly adjust the amps depending on the device connected.
You’ll need to install a second receptacle if you plan to charge more than one higher current device at a time.
Each item in Leviton’s USB Charger/Tamper-Resistant Receptacle line is designed to fit in a standard wallbox, use a standard wallplate and can be multi-ganged with any standard Leviton wiring device.
The Leviton in-wall USB charger comes in White (T5630-W) and Light Almond (T5630-T) and retails for around $21 and $26.
Manage Cookie Consent
By continuing to browse this site, you agree to cookies used to optimize the website experience.
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.